tubing - hoses - pipes - clamps & accescories
- coil tubs
- Hose clips - Hose clamps
-
Hose clamps 2-parts with loose guides, similar to DIN 20039 A
-
Band-It tape, Type 316
-
Hinge bolt clamps
-
Screw lock and hand lock with tension band (10 and 18 mm band width)
-
Consoles for hose clips
-
Band-It tape, Type Valustrap
-
Clamp driver flexible
-
Clamping pliers for ear clamps
-
Clamps 2-piece, Dimensions according to EN 14420-3 (DIN 2817)
-
Hose clips - 1eye, with prefitted insert ring
-
Safety hose clamps with optical overload protection, band width 12 mm
-
Mini hose clips, band width 9 mm
-
Hinge bolt clamps, 2-part
-
Band-It assembly tool
-
Band-It prefabricated clamps, Junior 201
-
Hose clips for brake hoses, DIN 3017
-
Hose clips - 1-eye
-
Band-It tape, Type 201
-
snap hose clip
-
Hose clips - 2-eye
-
Band-It scru-lokt buckles , Type 201
-
Wire retention clamp
-
Hose clamps 2-parts with loose guides and safety catches, similar to DIN 20039 B
-
Wire hose clamps for mounting hoses with spiral inlay
-
Hose clips - worm drives (DIN 3017-1), band width 9 mm
-
Clamps, 2 piece, for steam hoses, Dimensions according to EN 14423 (DIN 2826)
-
Hose clips - worm drives (DIN 3017-1), band width 12 mm
- fuel hoses - oil hoses - high pressure hoses
-
Hose brackets made from stainless steel for low pressure hoses
-
Banjo bolts 1-way (imperial), DIN 7643 version A
-
male thread hose nipple 24° cone (cutting ring fittings), DIN 2353
-
Hose nipple with sealing cone - 60°Cone, DIN 3863
-
Hose nipple with stud (with sealing edge)
-
male thread hose nipple (inch) 60° internal cone, DIN 3863
-
heat-resistant rubber hoses OLN M1L (to +100°C)
-
Suction hoses for hydraulic oil according to SAE 100 R 4 with ribbed exterior cover
-
Low pressure presses (for bench vice press)
-
Pipe bows ring hose nipple 90° with ring lug at one level
-
Union nuts metric, similar to DIN 7606
-
T-hose connectors
-
Low pressure presses (desktop unit with stand)
-
Hose nipple with pipe nozzle
-
Flat sealing threaded nipples for heavy goods vehicle compressors
-
Banjo bolts 2-way (metric)
-
Fuel hose with stainless steel wire braiding (fuel hoses)
-
Cutting rings / NC compression rings, DIN 3861
-
Hose nipple with pipe nozzle, 45° curved
-
Ring hose nipple with ring eye, DIN 7642
-
male thread hose nipple (metric) 60° internal cone, DIN 3863
-
Hose bushes for low pressure hoses
-
heat-resistant rubber hoses OLN M4M (to +135°C)
-
Double ring hose nipple, DIN 7642
-
Pipe bows hose nipple 90° with connecting nut (inches)
-
Fuel hoses, vulcanised textile braid, DIN 73379 (3/82)
-
Straight hose connectors
-
Pipe bows hose nipple 90° with connecting nut (metric)
-
Fuel hoses, bio-diesel, DIN 73379-3E (11/97)
-
Flat sealing hose nipples for heavy goods vehicle compressors
-
Threaded banjos, 60° internal cone (metric), DIN 7621
-
Union nuts, DIN 3870
-
Heat resistant rubber hoses OLN (up to +100 °C), OLNH (up to +120 °C) (will be discontinued)
-
Union nuts inches, similar to DIN 7606
-
Banjo bolts 1-way (metric), DIN 7643 version A
-
Fuel hoses with zinc plated steel wire braiding (fuel hoses)
-
Hose nipple with pipe nozzle, 90° curved
-
Union screws, DIN 3871
- butt weld fittings
-
T-pieces with same outlet, EN 10253 type A (DIN 2615)
-
Stainless steel ball valves, 3-piece, with full throughway and welding ends, up to PN 63
-
Screw connections with welded on and female thread - conical seal, PN 16
-
Slotted nuts for cone nozzles (dairy thread), DIN 11851
-
Screw connections with welded on - tapered seal, PN 16
-
Hose crew connection with, PN 20
-
Stainless steel ball valves, 3-piece, with full throughway and welding ends, up to PN 63
-
Screw connections with welded on and female thread - flat seal, PN 16
-
Welding neck flange DIN 2633, PN 16
-
Concentric reducers, EN 10253 type B (DIN 2616)
-
Loose flanges DIN 2642 for pre-welding flared discs, PN 10
-
Pipe caps, DIN 28011 / EN 10253 (DIN 2617)
-
Pipe bows 90° construction type 3S**, EN 10253 type A (DIN 2605)
-
Screw connections with welded on - flat seal, PN 16
-
T-pieces with reducing outlet, EN 10253 type A (DIN 2615)
-
Welding flared disks DIN 2642 for loose flanges, PN 10
-
Welding nipple similar to EN 10241/DIN 2982, to 50 bar
-
Screw connections with welded on and male thread - tapered seal, PN 16
-
Sleeves for welding (DIN 2986), PN 40
-
Screw connections with welded on and outside thread - flat seal, PN 16
-
Cone welding nozzles (dairy thread), DIN 11851 / similar to DIN 11851
-
Threaded pipe connectors (dairy thread), DIN 11851 / similar to DIN 11851
- rinsing units - rinsing unit accessories
- Tube fixations - Hose fixations
-
Rubber coated pipe clamps, DIN 3016-1
-
Binding spirals made of PE
-
Stainless steel pipe clamps - heavy-duty series, DIN 3015 T2
-
Abrasion protective hose for high pressure oil hoses
-
Double hose clamps
-
C-type carrier rails for heavy model series, DIN 3015 T2
-
Tube identifications (double arrow), DIN 2403 / GHS
-
Accessories for pipe clamps - light model series, DIN 3015 T1
-
Multiple cable holders for hoses
-
Beam clamps for pipe clamps M 8 / M 10
-
Cable straps - socket
-
Pipe clamps, Fischer
-
Pipe clamps with elastomer insert - heavy duty model series, DIN 3015 T2
-
Beam clamps with mounting hole for KK clamps and chain assembly
-
Hose / pipe clamping strip - KK
-
Screws and thread bars for pipe clamp
-
Hose bracket 2-, 3- and 4-fold
-
Releasable cable straps / bag ties
-
Pipe clamps - heavy duty model series, DIN 3015 T2
-
Steel round coils
-
Pipe clamps with pairs of clamp jaws-DIN 3015 T1/T2
-
Stainless steel pipe clamps - lightweight series, DIN 3015 T1
-
Double pipe clips, DIN 3015 T3
-
Pipe clamps - light model series, DIN 3015 T1
-
Professional hot air blower
-
Carrier rails-nuts for heavy duty model series, DIN 3015 T2
-
Cable straps - tube ties
-
Metal protection hoses against welding splatter and hot turnings
-
Pipe clamps
-
Interconnecting weld plates for light model series, DIN 3015 T1
-
Cable glands
-
C-type carrier rails for lightweight model series, DIN 3015 T1
-
Shrink hose, shrink relationship 2:1, flame resistant
-
Carrier rails-nuts for light model series, DIN 3015 T1
-
Mounting clips and hanger bolts for pipes
-
Pipe clamps with mounting hole
-
Cable protection hoses for quick assembly
-
Identification strap
-
Accessories for pipe clamps - heavy duty model series, DIN 3015 T2
-
Binding spirals made of HD-PE, black
-
Velcro holders for hoses and cables
-
Beam clamps with pipe holder (cable strap)
-
Pipe clamps - elastomer insert light model series, DIN 3015 T1
-
Tube connections-PKS for 90° transfer
- Hydraulic hoses and crimped fittings
-
Binding spirals made of HD-PE, black
-
Steel crimped fittings for 1 SN- / 2 SN- / 2 SC- / 4 SP- / 1 TE- / 2 TE- / 3 TE- / 1 TF- / 1 KU-hoses, DN 6 to DN 51
-
Abrasion protective hose for high pressure oil hoses
-
Stainless steel 1.4404 - Crimped fittings for 1 SN / 2 SN / 4 SP / 1 TF hoses, DN 6 to DN 51
-
O-rings for SAE flanges
-
Sealing sleeves with sealing lips for SAE flanges
-
Steel round coils
-
ready-made high pressure hoses with 2 steel wire meshes, EN 853
-
3 TE* - two highly resistant textile meshes, EN 854
-
1 KU - two highly resistant polyester meshes, SAE 100 R7 - EN 855
-
2 TE - one highly resistant textile mesh, EN 854
-
Steel crimped fittings for 1 SN- and 2 SN- wash hoses, DN 6 to DN 12
-
Crimped fittings for 4 SH hoses with tear-off protection PLUS (with inner skiving of the hose)
-
SAE flange halves 3000 PSI/6000 PSI (1 set = 2 pieces)
-
Water hoses -40°C to +150°C
-
4 SH super maximum pressure hoses, EN 856
-
1 TE - one highly resistant textile mesh, EN 854
-
ready-made high pressure cleaner water hoses
-
1 SN - one steel mesh, EN 853
-
1-way stainless steel braided PTFE hoses
-
2 SC - compact hose - two steel meshes, EN 857
-
Stainless steel 1.4571 - Crimped fittings for 4 SH hoses (with inner skiving of the hose) with tear-off protection
-
4 SP - 4-wire coil inserts, EN 856
-
2 SN - two steel meshes, EN 853
- Flanges - Compensators
-
Blind flange DIN 2527, PN 16
-
Elastomer compensators with malleable iron connections, PN 16
-
Screws, nuts and disks for flange
-
Welding neck flange DIN 2633, PN 16
-
Loose flanges DIN 2642 for pre-welding flared discs, PN 10
-
Thread washers DIN 2566, PN 16
-
Flange seals DVGW & BAM tested, TA air certified, recommended by KTW
-
Elastomer compensators (compact), PN 10
-
Compensators, stainless steel, PN 10/16
-
Welding flared disks DIN 2642 for loose flanges, PN 10
-
Elastomer compensators, PN 10/16
- Industrial hoses (large nominal widths)
-
Drinking water flat hoses goods
-
1 SN - one steel mesh, EN 853
-
Water hoses - Goldschlange?, up to 30 bar
-
Industrial construction hoses with Storz couplings
-
Breathing air hoses, 90/128/CE (will be discontinued)
-
Steam hoses DAMPF-TRIX? 6000, DIN EN ISO 6134-2 A, up to +210°C
-
Fire-extinguishing hoses with Storz coupling, DIN 14811 (2008)
-
ready-made high pressure cleaner water hoses
-
1 KU - two highly resistant polyester meshes, SAE 100 R7 - EN 855
-
Polyurethane hose set with CEJN couplings NW 7,2/male thread
-
Potable water hoses - AQUAPAL? flexible rubber hose, 20 bar
-
AC and ventilation hoses, PVC coated polyester mesh
-
Twin hoses for oxygen and acetylene gas, DIN EN ISO 3821 (replaces DIN 8541/EN 559)
-
PVC hoses with fabric braiding - food safe quality
-
CEJN Polyurethane hoses (Stream-Line)
-
Heavy suction pressure PU coil tubes
-
Heat resistant rubber hoses OLN (up to +100 °C), OLNH (up to +120 °C) (will be discontinued)
-
Chemical suction pressure hoses made of EPDM, EN 12115
-
Dairy hoses
-
Tank truck suction- pressure hose, NBR, EN 12115
-
Silicone hoses with fabric braiding, up to 200°C
-
Oil resistant hoses for cooling systems, similar to DIN 73411/79
-
heat-resistant rubber hoses OLN M4M (to +135°C)
-
Fuel hoses, vulcanised textile braid, DIN 73379 (3/82)
-
Autogenous hoses for acetylene gas, DIN EN ISO 3821 (replaces DIN 8541 / EN 559)
-
Silicone hoses (industrial quality)
-
Garden water hoses - QUATTROFLEX?-PLUS, GREENLINE?, -20°C to +60°C
-
Suction hoses for hydraulic oil according to SAE 100 R 4 with ribbed exterior cover
-
2 TE - one highly resistant textile mesh, EN 854
-
4 SH super maximum pressure hoses, EN 856
-
Fuel hose with stainless steel wire braiding (fuel hoses)
-
Sand blast hoses with abrasion resistant inner liner, EN ISO 3861:2008
-
Water hoses -40°C to +150°C
-
Medium suction pressure PU coil tubes, flame retardant, DIN 4102 B1
-
Double hose clamps
-
Low pressure steam hoses, up to +164 °C
-
Dairy vacuum pressure hoses with steel coils
-
PVC hoses without fabric braiding - food safe quality
-
Conveyor/cleaning hoses for food sector
-
1 TE - one highly resistant textile mesh, EN 854
-
Autogenous hoses for oxygen, DIN EN ISO 3821 (replaces DIN 8541 / EN 559)
-
2 SN - two steel meshes, EN 853
-
Fuel hoses, bio-diesel, DIN 73379-3E (11/97)
-
Flat compressed air water hoses
-
1-way stainless steel braided PTFE hoses
-
Compressed air water PVC hoses with fabric braiding for high pressure values, 40 bar
-
3 TE* - two highly resistant textile meshes, EN 854
-
Compressed air water PVC hoses with double fabric braiding for high pressure values, 80 bar
-
Flame retarding and insulating hose (industrial quality)
-
Suction pressure plastic coil tubes made from PVC
-
PVC compressed air hoses with fabric braiding, anti-static
-
Hose reel for compressed air complete with quick coupling NW7, 15 bar
-
PVC compressed air hoses with fabric braiding, highly flexible
-
Potable water hoses elastomer PE, 20 bar
-
Water hoses TRIX-ROTSTRAHL?, -40°C to +100°C
-
GSP hoses with push in fitting program
-
Flexible vacuum or pressure PVC hoses
-
Vacuum PVC-Flex plastic coil tubes
-
PC special pneumatic tubes
-
Chemical pressure hoses made of EPDM, EN 12115
-
Hose for all-combustible gases , EN 559
-
Oil resistant (external) steam hoses DAMPF-TRIX? 6000, DIN EN ISO 6134-2 B, up to +210°C
-
4 SP - 4-wire coil inserts, EN 856
-
Silicone hot air hoses up to +310°C, one-ply, up to 1.8 bar
-
Chemical suction pressure hoses made of EPDM, heavy-duty version, EN 12115
-
Rubber compressed air brake hoses, DIN 74310
-
heat-resistant rubber hoses OLN M1L (to +100°C)
-
Silicone hot air hoses up to +310°C, two-ply, up to 2.5 bar
-
Fire-extinguishing hoses, goods sold by length (piece goods), DIN 14811 (2008)
-
Fuel hoses with zinc plated steel wire braiding (fuel hoses)
-
PVC hoses with fabric braiding - complete with coupling socket and plug NW 7.2
-
Breathing air hose, EN 14593 / EN 14594
-
ready-made high pressure hoses with 2 steel wire meshes, EN 853
-
Hoses for cooling systems, similar to DIN 73411/96
-
Drinking water flat hoses with Storz coupling
-
2 SC - compact hose - two steel meshes, EN 857
-
Flexible hose for cooling systems
-
Propane butane hoses, DIN 4815 / DVGW
-
Easy vacuum-pressure PU coiled tubes
-
Compressed air water rubber hoses, DIN 20018*
-
Light vacuum plastic coil tubes made from PVC, superflex
-
Compressed air rubber hoses, anti-static
- silicone hoses - gas hoses
-
Hose for all-combustible gases , EN 559
-
Propane butane hoses, DIN 4815 / DVGW
-
Autogenous hoses for oxygen, DIN EN ISO 3821 (replaces DIN 8541 / EN 559)
-
Breathing air hose, EN 14593 / EN 14594
-
Twin hoses for oxygen and acetylene gas, DIN EN ISO 3821 (replaces DIN 8541/EN 559)
-
Silicone hoses (industrial quality)
-
Flame retarding and insulating hose (industrial quality)
-
Autogenous hoses for acetylene gas, DIN EN ISO 3821 (replaces DIN 8541 / EN 559)
-
Silicone hot air hoses up to +310°C, one-ply, up to 1.8 bar
-
Silicone hoses with fabric braiding, up to 200°C
-
Silicone hot air hoses up to +310°C, two-ply, up to 2.5 bar
-
Double hose clamps
-
tube cutter
- suction hoses - pressure hoses
-
Suction hoses for hydraulic oil according to SAE 100 R 4 with ribbed exterior cover
-
Chemical pressure hoses made of EPDM, EN 12115
-
AC and ventilation hoses, PVC coated polyester mesh
-
Tank truck suction- pressure hose, NBR, EN 12115
-
Flexible vacuum or pressure PVC hoses
-
Chemical suction pressure hoses made of EPDM, EN 12115
-
Dairy vacuum pressure hoses with steel coils
-
Light vacuum plastic coil tubes made from PVC, superflex
-
Heavy suction pressure PU coil tubes
-
Silicone hot air hoses up to +310°C, two-ply, up to 2.5 bar
-
Dairy hoses
-
Easy vacuum-pressure PU coiled tubes
-
Chemical suction pressure hoses made of EPDM, heavy-duty version, EN 12115
-
Conveyor/cleaning hoses for food sector
-
Silicone hot air hoses up to +310°C, one-ply, up to 1.8 bar
-
Suction pressure plastic coil tubes made from PVC
-
Medium suction pressure PU coil tubes, flame retardant, DIN 4102 B1
-
Vacuum PVC-Flex plastic coil tubes
- special hoses
-
Compressed air rubber hoses, anti-static
-
Polyurethane hoses, welding spatter resistant , external tolerance
-
High pressure polyamide hoses, up to 136 bar
-
Binding spirals made of HD-PE, black
-
Polyurethane hoses, not easily flammable, external tolerance
-
heat-resistant rubber hoses OLN M1L (to +100°C)
-
Shrink hose, shrink relationship 2:1, flame resistant
-
Cable protection hoses for quick assembly
-
Polyamide multiple hoses
-
TKB tube - the "Metal Plastic" -pipelines
-
Heat resistant rubber hoses OLN (up to +100 °C), OLNH (up to +120 °C) (will be discontinued)
-
PVC compressed air hoses with fabric braiding, anti-static
-
Flame retarding and insulating hose (industrial quality)
-
Polyurethane hoses, electrically conductive, external tolerance
-
Abrasion protective hose for high pressure oil hoses
-
Professional hot air blower
-
heat-resistant rubber hoses OLN M4M (to +135°C)
-
Metal protection hoses against welding splatter and hot turnings
- tube bundle
- Tubes
-
Copper installation tubes, rings, soft (R 220), DIN EN 1057 / DVGW
-
Beverage line pipes - welded, DIN 11850 (will be discontinued)
-
Stainless steel pipe lines - seamless, DIN EN ISO 1127
-
Aluminium pipes for push in connectors
-
Polyamide tubes (PA 12 H) - bar form, (DIN 73378 / DIN 74324)*
-
Stainless steel pipe lines - welded, DIN EN ISO 1127
-
Tubes PVC-U, DIN 8062 / EN 1452-2 PN 16
-
Copper installation tubes, lengths, hard (R 290), semi-hard (R 250), DIN EN 1057 / DVGW
-
Electrical bending devices, up to ? 28
-
Precision-hydraulic tube - seamless, EN 10305-4 (DIN 2445/2)
-
Hand pipe bending devices, up to ? 18
- Pipe clamps
-
Stainless steel pipe clamps - lightweight series, DIN 3015 T1
-
Pipe clamps - heavy duty model series, DIN 3015 T2
-
Loose pipe clamps
-
Carrier rails-nuts for light model series, DIN 3015 T1
-
Mounting clips and hanger bolts for pipes
-
Double pipe clips, DIN 3015 T3
-
Rod steel U bolts, DIN 3570, Form A
-
Interconnecting weld plates for light model series, DIN 3015 T1
-
Profile plates for loose pipe clamps
-
Rubber coated pipe clamps, DIN 3016-1
-
Carrier rails-nuts for heavy duty model series, DIN 3015 T2
-
Pipe clamps - elastomer insert light model series, DIN 3015 T1
-
C-type carrier rails for heavy model series, DIN 3015 T2
-
Beam clamps with mounting hole for KK clamps and chain assembly
-
Accessories for pipe clamps - heavy duty model series, DIN 3015 T2
-
Clamp brackets complete with plates and nuts
-
Accessories for pipe clamps - light model series, DIN 3015 T1
-
Beam clamps for pipe clamps M 8 / M 10
-
Steel cable clamps, Similar to DIN 741
-
Screws and thread bars for pipe clamp
-
Stainless steel pipe clamps - heavy-duty series, DIN 3015 T2
-
Pipe clamps with elastomer insert - heavy duty model series, DIN 3015 T2
-
Pipe clamps, Fischer
-
Pipe clamps with pairs of clamp jaws-DIN 3015 T1/T2
-
C-type carrier rails for lightweight model series, DIN 3015 T1
-
Pipe clamps
-
Pipe clamps - light model series, DIN 3015 T1
- Hose reels
-
Hose reel with crank handle and stageless adjustable brake, up to 300 bar
-
Hose reel and hose coil - standard, up to 7 bar
-
Hose guard safety cable
-
Universal hose bracket
-
CEJN Automatic hose reels, up to 16 bar
-
Automatic hose reel for compressed air and water, 50 bar
-
Universal hose stopper
-
Automatic hose reel for compressed air and water, 10 bar
-
Automatic hose reel for hydraulic oil, water and grease, up to 400 bar
-
Hose reel for hygiene area, to 250 bar
-
CEJN Automatic cable winders
-
wall hose holder
-
Automatic hose reel for compressed air, 14 bar
-
Hose guard burst protection (complies with the EN ISO 4414 § 5.4.5.11.1)
-
Hose coil and wall hose holder - prof, 25 bar
-
Swivel bracket for hose reel
-
Hose reel for compressed air complete with quick coupling NW7, 15 bar
-
Automatic hose reel for compressed air and water, up to 15 bar
- compressed air hose - water hose
-
PVC hoses without fabric braiding - food safe quality
-
CEJN Polyurethane hoses (Stream-Line)
-
Polyurethane hoses, not easily flammable, external tolerance
-
PC special pneumatic tubes
-
Water hoses TRIX-ROTSTRAHL?, -40°C to +100°C
-
Polyamide hoses, standard
-
Polyamide multiple hoses
-
Polyethylene hoses
-
Compressed air water rubber hoses, DIN 20018*
-
PVC compressed air hoses with fabric braiding, anti-static
-
Drinking water flat hoses with Storz coupling
-
PVC hoses with fabric braiding - complete with coupling socket and plug NW 7.2
-
Polyurethane hoses, food-safe, external tolerance
-
Rubber compressed air brake hoses, DIN 74310
-
Compressed air water PVC hoses with double fabric braiding for high pressure values, 80 bar
-
Polyurethane hoses, welding spatter resistant , external tolerance
-
Industrial construction hoses with Storz couplings
-
PTFE / PFA hoses
-
Polyamide hoses, flexible
-
Fire-extinguishing hoses, goods sold by length (piece goods), DIN 14811 (2008)
-
Polyurethane hoses, internal tolerance
-
Compressed air water PVC hoses with fabric braiding for high pressure values, 40 bar
-
TKB tube - the "Metal Plastic" -pipelines
-
Polyurethane hoses, external tolerance
-
Automatic hose reel for hydraulic oil, water and grease, up to 400 bar
-
Compressed air rubber hoses, anti-static
-
PVC compressed air hoses with fabric braiding, highly flexible
-
Drinking water flat hoses goods
-
Flat compressed air water hoses
-
Garden water hoses - QUATTROFLEX?-PLUS, GREENLINE?, -20°C to +60°C
-
Polyurethane hoses, electrically conductive, external tolerance
-
Aluminium pipes for push in connectors
-
Polyamide tubes (PA 12 H) - bar form, (DIN 73378 / DIN 74324)*
-
High pressure polyamide hoses, up to 136 bar
-
Fire-extinguishing hoses with Storz coupling, DIN 14811 (2008)
-
tube cutter
-
Polyurethane multiple hoses
-
Polyamide duo hoses
-
PVC hoses with fabric braiding - food safe quality
-
Water hoses - Goldschlange?, up to 30 bar
-
Automatic hose reel for compressed air and water, 10 bar
-
Potable water hoses elastomer PE, 20 bar
-
Inches Polyurethane hoses, external tolerance
-
Potable water hoses - AQUAPAL? flexible rubber hose, 20 bar
- GSP hoses with push in fitting program
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Tubes with pressure carriers made from high strength textile braiding
-
Push-in fittings with male thread, cylindrical thread in inches, 60° cone
-
Threaded nozzle push in fitting, PN 15
-
Hose connector push in fitting, PN 15
-
90°Push-in fittings with union nut, metric thread, 24° cone
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Push-in fitting with male thread, metric thread, 24° cone
-
Push-in fittings with union nut, metric thread, 24° cone
-
45°Push-in fittings with union nut, metric thread, 24° cone
- pneumatic tubes - water hoses (small nominal widths)
-
Aluminium pipes for push in connectors
-
Polyamide hoses, flexible
-
Polyamide hoses, standard
-
PTFE / PFA hoses
-
Polyurethane hoses, welding spatter resistant , external tolerance
-
Polyurethane hoses, food-safe, external tolerance
-
Polyamide multiple hoses
-
Polyethylene hoses
-
High pressure polyamide hoses, up to 136 bar
-
Polyurethane hoses, electrically conductive, external tolerance
-
Polyurethane hoses, external tolerance
-
Polyurethane multiple hoses
-
Polyurethane hoses, not easily flammable, external tolerance
-
Polyurethane hoses for PC water cooling systems (will be discontinued)
-
Inches Polyurethane hoses, external tolerance
-
CEJN Polyurethane hoses (Stream-Line)
-
Polyamide duo hoses
-
Polyurethane hoses, internal tolerance
-
Tube cutter for aluminium, brass, copper and thin walled steel pipes
-
TKB tube - the "Metal Plastic" -pipelines
-
Polyamide tubes (PA 12 H) - bar form, (DIN 73378 / DIN 74324)*
-
Copper installation tubes, rings, soft (R 220), DIN EN 1057 / DVGW
-
tube cutter
-
PC special pneumatic tubes
-
Copper installation tubes, lengths, hard (R 290), semi-hard (R 250), DIN EN 1057 / DVGW
- Coolant hoses
- PVC fittings, EN 1452-3
-
Adhesive sockets, end caps, PVC-U, PN 16
-
Flat seals for PVC-U loose flanges
-
Bulkhead screw connections (no female thread), PN 10
-
Adhesive threaded nipples PVC-U, inner and external bonding surfaces (only for plastic thread), PN 10
-
Cleaner for PVC fittings
-
Adhesive threaded sockets PVC-U, PN 16/10
-
Adhesive flange adaptors for loose flanges PVC-U, PN 16
-
Adhesive sockets, T-pieces, reduced PVC-U, PN 16
-
Adhesive sockets PVC-U, PN 16
-
Threaded angle PVC-U (only for plastic thread), PN 10
-
Check valves with female thread from PVC-U (only for plastic thread), PN 16/10
-
Pneumatic diaphragm valves, single action, zero position closed, PN 10
-
Ball valves with welding collars, PP-H industrial version, PN 10
-
Adhesive threaded angles 90° PVC-U, PN 16/10
-
Ball valves, female thread, PP-H industrial version (for plastic thread), PN 10
-
Thread connections, female thread PVC-U (only for plastic thread), PN 16
-
Tubes PVC-U, DIN 8062 / EN 1452-2 PN 16
-
Closing plugs PVC-U (only for plastic thread), PN 10
-
Single ring adhesive socket ball valves, PVC-U water version, PN 16/10
-
Single ring ball valves with female thread. PVC-U water version (for plastic thread), PN 16/10
-
Adhesive sockets, angle 90°, PVC-U, PN 16
-
Threaded T-pieces PVC-U (only for plastic thread), PN 10
-
Adhesive sockets, angle 45°, PVC-U, PN 16
-
Adhesive threaded T-pieces PVC-U, PN 16/10
-
O-rings for screw connections PVC-U, PN 16
-
Adhesive sockets, screw connections PVC-U, PN 16
-
PVC-U ball valves with pneumatic rotary actuator, PN 16/10
-
Adhesive bulkhead screw connections (container, tank, vessel connectors), PVC-U, PN 10
-
Flat brush for PVC adhesive
-
Adhesive hose screw connections, PVC-U, PN 16
-
Adhesives for PVC fittings
-
Check valves with adhesive socket PVC-U, PN 16/10
-
Pneumatic diaphragm valves, single action, zero position open, PN 10
-
Double nipple PVC-U (only for plastic thread), PN 10
-
Cross piece adhesive sockets PVC-U, PN 16
-
Adhesive transition socket nipples, PVC-U, PN 16
-
Loose flanges PVC-U, PN 16/10
-
Adhesive sockets, threaded connections, female thread (only for plastic thread), PN 16
-
Pipe clamps with mounting hole
-
Manually operated diaphragm valves, PN 10
-
Ball valves, female thread, PVC-U water version (for plastic thread), PN 16/10
-
Ball valves, female thread, PVC-U industrial version (for plastic thread), PN 16/10
-
Reducing nipple PVC-U short version (only for plastic thread), PN 10
-
Threaded sockets PVC-U (only for plastic thread), PN 10
-
Adhesive sockets, T-pieces, PVC-U, PN 16
-
Threaded angle 45° PVC-U (only for plastic thread), PN 10
-
Threaded nozzle PVC-U (only for plastic thread), PN 10
-
Reducing nipple PVC-U (only for plastic thread), PN 10
-
Adhesive reductions, short, PVC-U, PN 16
-
End caps PVC-U (only for plastic thread), PN 10
-
Adhesive sockets, ball valves, PVC-U industrial version, PN 16/10
-
Adhesive sockets, threaded connections, male thread (only for plastic thread), PN 16
-
Adhesive sockets, ball valves, PVC-U water version, PN 16/10
-
PVC-U ball valves with electrical rotary actuator (industrial version), PN 16/10
|
共526種產品
-
- （共13種產品）
- ￥15.359999656677246 ~ ￥124.55999755859375
-
- （共1種產品）
- ￥337.760009765625 ~ ￥337.760009765625
-
- （共106種產品）
- ￥215.27999877929688 ~ ￥22604.80078125
-
- （共49種產品）
- ￥82.23999786376953 ~ ￥12754.7197265625
-
- （共6種產品）
- ￥95.04000091552734 ~ ￥391.44000244140625
-
- （共22種產品）
- ￥1.5199999809265137 ~ ￥208.39999389648438
-
- （共11種產品）
- ￥373.6000061035156 ~ ￥11672.5595703125
-
- （共5種產品）
- ￥288.0 ~ ￥893.3599853515625
-
- （共8種產品）
- ￥5.360000133514404 ~ ￥64.16000366210938
-
- （共4種產品）
- ￥121.5999984741211 ~ ￥809.2000122070312
-
- （共7種產品）
- ￥406.1600036621094 ~ ￥1190.56005859375
-
- （共6種產品）
- ￥600.4000244140625 ~ ￥1700.239990234375
-
- （共11種產品）
- ￥16.559999465942383 ~ ￥727.1199951171875
-
- （共3種產品）
- ￥67.5199966430664 ~ ￥125.5999984741211
-
- （共6種產品）
- ￥253.75999450683594 ~ ￥779.760009765625
-
- （共9種產品）
- ￥8.5600004196167 ~ ￥34.2400016784668
-
- （共10種產品）
- ￥8.0 ~ ￥189.83999633789062
-
- （共15種產品）
- ￥1647.52001953125 ~ ￥5264.64013671875
-
- （共1種產品）
- ￥33.36000061035156 ~ ￥33.36000061035156
-
- （共12種產品）
- ￥593.760009765625 ~ ￥2147.43994140625
|
