ball valves - check valves - process valves
- Ball valves with forced exhaust
- Electrically actuated ball valves
-
Stainless steel 3-way ball valves with electrical rotary actuator (sanitary version), PN 63 (will be discontinued)
-
Stainless steel ball valves, 3-piece, with full throughway and direct assembly flange, PN 63
-
Ball valves with electrical rotary actuators (sanitary version), to PN 40*
-
Ball valves with electrical rotary actuators (sanitary version), PN 40 (will be discontinued)
-
Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63
-
Repair sets for stainless steel ball bearings 3-piece with direct assembly flange, PN 63
-
Brass 3-way ball valves with assembly flanges according to ISO 5211, PN 40
-
Stainless steel 3-way ball valves with assembly flange according to ISO 5211, PN 63
-
3-way ball valves with electrical rotary actuator (sanitary version), PN 63 (will be discontinued)
-
Stainless steel 3-way ball valves with electrical rotary actuator (industrial version), PN 63
-
Electrically driven rotary actuator (industrial version)
-
3-way ball valves with electrical rotary actuator (industrial version), PN 40
-
repair sets for stainless steel 3-way ball valves with direct assembly flange, PN 63
-
Brass ball valves with full throughways and direct assembly flanges, up to PN 40
-
Ball valve with timer, PN 16
-
Ball valve with electrical rotary actuator (industrial version), up to PN 40
-
High pressure ball valves with electric rotary actuators (industrial version), up to PN 500
- pneumatically actuated 2/2-way valves
- discharge valve
- shut-off valve
-
2/2-way valves with external control - Air, Eco line
-
Manually operated diaphragm valves, PN 10
-
Drain valves with ring for compressed air reservoir on vehicles, PN 20
-
Stainless steel socket shut-off valves, Eco-Line / PN 14
-
Electrical, pneumatic and mechanical valves
-
Drain valves and venting valves without nozzle, PN 10
-
Sleeves, gate valves, PN 20
-
Pneumatic pinch valves with female thread (idle position open), PN 6
-
Needle shut-off valves with bulkhead thread for panel mounting, PN 18
-
Stainless steel socket shut-off gates, PN 16
-
Ball shut-off valve, PN 40
-
Needle shut-off valves, up to PN 100
-
2/2-way valves with external control - air, closing with media flow
-
Blocking valves, pneumatically operated, PN 10
-
Stainless steel Y-socket shut-off valves, PN 40
-
Stainless steel needle shut-off valves, PN 400
-
Pneumatic diaphragm valves, single action, zero position open, PN 10
-
Hose clamps - pinch-Fix
-
Swing sleeve shut-off valve (free flow valve), DVGW tested, PN 10*
-
Hose clamps - speed controller
-
Needle shut-off valves with hand wheel, up to PN 400
-
Sleeves, shut-off valves, PN 16
-
Pneumatic pinch valves with flanges DIN 2632 (idle position open), PN 6
-
Stainless steel shut-off valve, Eco-Line PN 300
-
Drain valves and venting valves with nozzle, PN 25
-
Pneumatic diaphragm valves, single action, zero position closed, PN 10
-
Quick shut-off valve according to DIN 4817-1, PN 16
- In-line ball valve with thread or welding ends
- Strainer
- Check valves
-
Check valves with cutting ring connection and cushion
-
Check valves made from polypropylene, PN 6
-
Stainless steel, hydraulic check valves, up to PN 350
-
Stainless steel check valves of lightweight design, Eco-Line / PN 16
-
Check valves* with male thread and push-in fitting
-
Check valves light design, up to PN 12
-
Foot valves of lightweight design
-
Check valves* with push-in fitting
-
Strainer for check valves, light design
-
Check valves for vacuum, to PN 25
-
Swing check valves, metallic sealing, Eco-Line / PN 16
-
Check valves* with male thread and push-in fitting
-
Check valves with cutting ring connection
-
Laboratory check valves, PN 4
-
Swing check valves, metallic sealing, PN 16
-
Swing check valves, to PN 12
-
Check valves with cutting ring connection and cushion
-
Check valves* with cylindrical male thread and push-in fitting
-
Stainless steel check valves of lightweight design, PN 16
-
Check valves brass nickel plated, to PN 20
-
Y-check valves, DIN 3502, PN 16 / PN 10
-
Mini check valves, without spring, brass nickel-plated, PN 10
-
Mini check valves, brass nickel-plated, PN 10
-
Stainless steel Y-check valves, PN 40
-
Hydraulic check valves, up to PN 350
-
Check valves* with cylindrical male thread and push-in fitting
-
Stainless steel foot valves of lightweight design
-
Foot valves made of polypropylene
-
Check valves with adhesive socket PVC-U, PN 16/10
-
Check valves heavy design, to PN 20
-
Brass check valves, PN 16
-
Check valves with female thread from PVC-U (only for plastic thread), PN 16/10
- diaphragm valves / pinch valves
- butterfly valves
- High pressure ball valves
-
Stainless steel, high-pressure ball valves, up to PN 500
-
Stainless steel, high-pressure ball valves with cutting ring connection, DIN 2353, up to PN 500
-
High pressure-3-way-ball valves, to PN 500
-
Stainless steel, high-pressure ball valves, up to PN 500
-
High pressure ball valves with electric rotary actuators (industrial version), up to PN 500
-
Stainless steel, high-pressure 3-way ball valves with cutting ring connection, DIN 2353, up to PN 400
-
High pressure ball valves with cutting ring connections DIN 2353, up to PN 500
-
High pressure ball valves, up to PN 500
-
High pressure ball valves with pneumatic rotary actuators, up to PN 500
-
Stainless steel, high-pressure 3-way ball valves, up to PN 400
-
High pressure-3-way-ball valves, High pressure ball valves with cutting ring connections DIN 2353, up to PN 500
- 3-way ball valves
-
3-way T ball valves with one-sided toggle grips, compact, PN 20
-
3-way valves, horizontal design
-
repair sets for stainless steel 3-way ball valves with direct assembly flange, PN 63
-
Stainless steel 3-way ball valves with electrical rotary actuator (sanitary version), PN 63 (will be discontinued)
-
3-way valves, vertical design
-
High pressure-3-way-ball valves, High pressure ball valves with cutting ring connections DIN 2353, up to PN 500
-
3-way ball valves with pneumatic rotary actuator, PN 40
-
Stainless steel 3-way ball valves, up to PN 63
-
Stainless steel 3-way ball valves with electrical rotary actuator (industrial version), PN 63
-
Stainless steel, high-pressure 3-way ball valves, up to PN 400
-
3-way ball valves with electrical rotary actuator (sanitary version), PN 63 (will be discontinued)
-
3-way ball valves, L-design with fixing thread, PN 20
-
Stainless steel, high-pressure 3-way ball valves with cutting ring connection, DIN 2353, up to PN 400
-
High pressure-3-way-ball valves, to PN 500
-
3-way ball valves, L-design with fixing thread, PN 20
-
3-way hose valves (T position) made of PVDF, PN 1
-
3-way ball valves, up to PN 55
-
Stainless steel 3-way ball valves, Eco-Line / PN 63
-
3-way ball valves with electrical rotary actuator (industrial version), PN 40
-
3-way flanged ball valves, reduced throughway, PN 16
-
Stainless steel 3-way ball valves with assembly flange according to ISO 5211, PN 63
-
3-way hose valves (T position) made of PE, PN 1
-
Repair sets for stainless steel 3-way flanged ball valves, PN 16
-
Brass 3-way ball valves with assembly flanges according to ISO 5211, PN 40
-
Stainless steel 3-way flanged ball valves, full throughway, PN 16
-
Stainless steel 3-way ball valves with pneumatic rotary actuator, PN 63
- flanged ball valves
-
Stainless steel, compact, flanged ball valves with full throughway, PN 16/40
-
3-way flanged ball valves, reduced throughway, PN 16
-
Flanged ball valves, 2-piece, with full throughway, DVGW tested*, PN 40
-
Stainless steel flanged ball valves, 2-piece, with full throughway, PN 40
-
Flanged ball valves, 2-piece, with pneumatic rotary actuator, PN 16/40
-
Stainless steel 3-way flanged ball valves, full throughway, PN 16
-
Compact flanged ball valves with full throughway, PN 16/40
-
Stainless steel flanged ball valves, 3-piece, with full throughway, PN 16/40
-
Repair sets for stainless steel 3-way flanged ball valves, PN 16
-
Stainless steel flanged ball valves, 2-piece, with pneumatic rotary actuator, PN 16/40
-
Repair sets for stainless steel flanged ball valves 3-part, PN 16/40
-
Stainless steel flanged ball valves, 2-piece, with full throughway, PN 16
-
Flanged ball valves, 1-piece, with full throughway, PN 16
-
Flanged ball valves, 2-piece, with full throughway, DVGW tested for gas, PN 16
-
Stainless steel, compact, flanged ball valves with full throughway, Eco-Line PN 16/40
-
Repair sets for stainless steel compact flanged ball valves, PN 16/40
-
Stainless steel flanged ball valves, 3-piece, with pneumatic rotary actuator, PN 16/40
-
Compact, flanged ball valves with pneumatic rotary actuator, PN 16/40
-
Stainless steel, compact, flanged ball valves with pneumatic rotary actuator, PN 16/40
- mini ball valves
-
Stainless steel mini ball valves with one-sided toggle grips, Eco-Line/PN 63
-
Stainless steel mini ball valves with one-sided toggle grips, PN 25
-
Mini ball valves with toggles, PN 15
-
Distributor bars with integrated ball valves, PN 10
-
4-way valves, horizontal design with double angled bore
-
Bulkhead angle stop cock with push in fitting
-
3-way valves, vertical design
-
Angle stop cock with cylindrical male thread and push in fitting
-
3-way valves, horizontal design
-
4-way valves, horizontal design with throughway bore
-
Stop cocks with male thread and push in fitting
-
Mini ball valves with long handle, PN 15
-
3/2-way valves* with cylindrical male thread and push in fitting
-
Stop cocks* with cylindrical male thread and push in fitting
-
5-way valves, vertical design
-
Ball valves with fastening thread, PN 20
-
3-way ball valves, L-design with fixing thread, PN 20
-
Mini ball valves with forced exhaust, PN 20
-
Laboratory hose valves, HD-PE
-
Elbow ball valves with one-sided toggle, compact, PN 20
-
Angle stop cock with push in fitting
-
Screw-in elbow ball valves, PN 20
-
3/2-way valves* with push in fitting
-
Angle stop cocks with male thread and push in fitting
-
Mini ball valves with toggles, one sided, compact, EN 331, PN 20
-
Ball valves with fastening thread, PN 40
-
3-way T ball valves with one-sided toggle grips, compact, PN 20
-
3-way ball valves, L-design with fixing thread, PN 20
-
Stop cocks with push in fitting
-
2-way valves
-
2-way hose valves made of PE, PN 1
-
KFE ball valves, PN 10
-
Elbow ball valves, PN 20
-
Mini ball valves with toggles, one sided, PN 15
-
Bulkhead stop cock with push in fitting
- In-line ball valve with thread or welding ends
-
Stainless steel ball valves, 2-piece, for use in oxygen plants, PN 20
-
Stainless steel ball valves, 3-piece, with full throughway, up to PN 63
-
Stainless steel ball valves 2-piece, DVGW tested (PN 5/MOP 5), up to PN 100
-
Cylinder padlocks
-
Ball valves, 2-piece, with full throughway, silicone-free, up to PN 80
-
Ball valves, 2-piece, brass, for use in oxygen systems, PN 30
-
Repair sets for stainless steel ball bearings 3-piece with direct assembly flange, PN 63
-
Ball valve with electrical rotary actuator (industrial version), up to PN 40
-
Stainless steel ball valves, 2-piece, lightweight design, with full throughway, up to PN 63
-
Screw-in ball valves, DVGW tested (PN 5 / MOP 5), up to PN 50
-
Screw-in ball valves, 2-piece, with full throughway, up to PN 50
-
Ball valve with timer, PN 16
-
Stainless steel ball valves, 3-piece, with full throughway, short design, up to PN 63
-
Ball valves, 2-piece, with full throughway, up to PN 50
-
High pressure ball valves with electric rotary actuators (industrial version), up to PN 500
-
Ball valves with electrical rotary actuators (sanitary version), to PN 40*
-
Stainless steel ball valves, 2-piece, with full throughway, up to PN 130
-
Ball valves DVGW approved (PN 5/MOP 5), EN 331, up to PN 50
-
Stainless steel ball valves with spring return, PN 63
-
High pressure ball valves with pneumatic rotary actuators, up to PN 500
-
Stainless steel ball valves, 1-piece, with reduced throughway, PN 63
-
Butterfly valves with female thread, PN 16
-
Brass ball valves with full throughways and direct assembly flanges, up to PN 40
-
Soft close ball valves DVGW tested (PN 5/MOP 5), EN 331, to PN 50
-
Stainless steel ball valves, 2-piece, with full throughway, Eco-Line / PN 63
-
Repair sets for stainless steel ball valves 3-part
-
Ball valves with pneumatic rotary actuators, up to PN 40
-
Ball valves, male thread, 2-piece, with full throughway, up to PN 20
-
Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63
-
Screw-in ball valves, 2-piece, with full throughway, Eco-Line / PN 25
-
Ball valves with electrical rotary actuators (sanitary version), PN 40 (will be discontinued)
-
Ball valves, 2-piece, with full throughway, compact design, up to PN 50
-
Stainless steel ball valves, 2-piece, lightweight design, with full throughway, Eco-Line / PN 63
-
Ball valves with spring return, up to PN 65
-
Stainless steel ball valves, 3-piece, with full throughway and welding ends, up to PN 63
-
Stainless steel ball valves, 3-piece, with pneumatic rotary actuator, PN 63
-
Combi-handles for nickel-plated brass ball valves
-
Stainless steel ball valves, 3-piece, with full throughway and welding ends, up to PN 63
-
Stainless steel ball valves, 3-piece, with full throughway and direct assembly flange, PN 63
-
Ball valves for drinking water DVGW & KTW approved, EN 13828, up to PN 50
-
Screw-in ball valves, 2-piece, with full throughway, short design, up to PN 50
-
Ball valves, 2-piece, with full throughway, Eco-Line / PN 25
- pneumatically actuated ball valves and butterfly valves
-
repair sets for stainless steel 3-way ball valves with direct assembly flange, PN 63
-
Stainless steel 3-way ball valves with pneumatic rotary actuator, PN 63
-
Stainless steel flanged ball valves, 3-piece, with pneumatic rotary actuator, PN 16/40
-
3-way ball valves with pneumatic actuator, double acting
-
Compact, flanged ball valves with pneumatic rotary actuator, PN 16/40
-
Pneumatically driven rotary actuators for mounting on ball valves
-
Universal signal boxes for pneumatic rotary actuators, Classic
-
Butterfly valves with pneumatic rotary actuator, PN 10/16
-
PVC-U ball valves with pneumatic rotary actuator, PN 16/10
-
Pneumatic diaphragm valves, single action, zero position closed, PN 10
-
Stainless steel 3-way ball valves with assembly flange according to ISO 5211, PN 63
-
Stainless steel flanged ball valves, 2-piece, with pneumatic rotary actuator, PN 16/40
-
Butterfly valves with pneumatic rotary actuator, PN 25
-
5/2-way solenoid valves G 1/4" with hole pattern according to NAMUR, SN3000 model series
-
Stainless steel, compact, flanged ball valves with pneumatic rotary actuator, PN 16/40
-
5/2-way and 3/2-way solenoid valves with spring return and hole pattern according to NAMUR
-
Stainless steel ball valves, 3-piece, with full throughway and direct assembly flange, PN 63
-
NAMUR adapter plates with flow control silencers / spacer plates
-
Blocking valves, pneumatically operated, PN 10
-
2/2-way valves with external control - Air, Eco line
-
Stainless steel ball valves with pneumatic actuator
-
Flanged ball valves, 2-piece, with pneumatic rotary actuator, PN 16/40
-
Repair sets for stainless steel ball bearings 3-piece with direct assembly flange, PN 63
-
Stainless steel ball valves, 3-piece, with pneumatic rotary actuator, PN 63
-
Brass 3-way ball valves with assembly flanges according to ISO 5211, PN 40
-
Pneumatic pinch valves with flanges DIN 2632 (idle position open), PN 6
-
Universal signal boxes for pneumatic rotary actuators, Compact
-
2/2-way valves with external control - air, closing with media flow
-
Butterfly valves with pneumatic rotary actuator, PN 20
-
Brass ball valves with full throughways and direct assembly flanges, up to PN 40
-
High pressure ball valves with pneumatic rotary actuators, up to PN 500
-
Ball valves with pneumatic actuator
-
3-way ball valves with pneumatic rotary actuator, PN 40
-
Reducing sleeve for square fitting
-
Pneumatic pinch valves with female thread (idle position open), PN 6
-
Ball valves with pneumatic rotary actuators, up to PN 40
-
Pneumatic diaphragm valves, single action, zero position open, PN 10
- plastic ball valves
-
Sockets ball valves PP-H for polyfusion or butt welding, PN 10 (will be discontinued)
-
2-way hose valves made of PVDF, PN 1
-
Adhesive sockets, ball valves, PVC-U water version, PN 16/10
-
PVC-U ball valves with pneumatic rotary actuator, PN 16/10
-
Adhesive sockets, ball valves, PVC-U industrial version, PN 16/10
-
Bulkhead stop cock with push in fitting
-
3-way hose valves (T position) made of PE, PN 1
-
Angle stop cock with cylindrical male thread and push in fitting
-
Check valves with female thread from PVC-U (only for plastic thread), PN 16/10
-
3-way valves, horizontal design
-
Ball valves, female thread, PVC-U industrial version (for plastic thread), PN 16/10
-
Check valves with adhesive socket PVC-U, PN 16/10
-
5-way valves, vertical design
-
Drain ball valves made of plastic, PN 4
-
3-way hose valves (T position) made of PVDF, PN 1
-
Stop cocks with male thread and push in fitting
-
Single ring ball valves with female thread. PVC-U water version (for plastic thread), PN 16/10
-
2-way valves
-
Ball valves with welding collars, PP-H industrial version, PN 10
-
Single ring adhesive socket ball valves, PVC-U water version, PN 16/10
-
Stop cocks with push in fitting
-
Ball valves, female thread, PVC-U water version (for plastic thread), PN 16/10
-
Laboratory hose valves, HD-PE
-
Ball valves, polypropylene, PN 10
-
Ball valves, female thread, PP-H industrial version (for plastic thread), PN 10
-
Angle stop cocks with male thread and push in fitting
-
Angle stop cock with push in fitting
-
Drain valves made of plastic, PN 2
-
Stop cocks* with cylindrical male thread and push in fitting
-
4-way valves, horizontal design with double angled bore
-
PVC-U ball valves with electrical rotary actuator (industrial version), PN 16/10
-
Bulkhead angle stop cock with push in fitting
-
3-way valves, vertical design
-
4-way valves, horizontal design with throughway bore
-
2-way hose valves made of PE, PN 1
-
Retention clips for plastic ball valves
- elbow ball valves
-
Elbow ball valves, PN 20
-
Elbow ball valves with one-sided toggle, compact, PN 20
-
Bulkhead angle stop cock with push in fitting
-
Elbow ball valves, DVGW tested (PN 5/MOP 5), EN 331, PN 40
-
Screw-in elbow ball valves, PN 20
-
Angle stop cock with push in fitting
-
Angle stop cocks with male thread and push in fitting
-
Angle stop cock with cylindrical male thread and push in fitting
-
Screw-in elbow ball valves, DVGW tested (PN 5/MOP 5), EN 331, PN 40
|
共334種產品
-
- （共7種產品）
- ￥914.7999877929688 ~ ￥2699.199951171875
-
- （共2種產品）
- ￥140.8800048828125 ~ ￥143.27999877929688
-
- （共18種產品）
- ￥1292.0 ~ ￥12232.7197265625
-
- （共4種產品）
- ￥483.2799987792969 ~ ￥1742.47998046875
-
- （共11種產品）
- ￥312.79998779296875 ~ ￥11672.5595703125
-
- （共2種產品）
- ￥183.27999877929688 ~ ￥214.32000732421875
-
- （共10種產品）
- ￥3212.239990234375 ~ ￥38749.0390625
-
- （共8種產品）
- ￥172.0 ~ ￥210.9600067138672
-
- （共1種產品）
- ￥49.52000045776367 ~ ￥49.52000045776367
-
- （共7種產品）
- ￥788.1599731445312 ~ ￥2282.9599609375
-
- （共64種產品）
- ￥3291.52001953125 ~ ￥12574.240234375
-
- （共1種產品）
- ￥249.60000610351562 ~ ￥249.60000610351562
-
- （共3種產品）
- ￥196.32000732421875 ~ ￥280.6400146484375
-
- （共8種產品）
- ￥471.67999267578125 ~ ￥493.20001220703125
-
- （共23種產品）
- ￥2580.56005859375 ~ ￥24390.560546875
-
- （共3種產品）
- ￥384.6400146484375 ~ ￥1284.800048828125
|
